Have you ordered a beautiful neon sign but you’re not quite sure how to install it? Well, while proper setup and installation is critical to keep your sign safe, the process is actually very easy! Feel like a professional when installing your sign by following our simple guide.
Our installation guide provides some tips on the best way to install and keep these signs as safe as possible.
Permanent, Temporary or Portable Setup
There are lots of different ways to use or set up your neon sign. They can be permanently installed on your walls, they can have a temporary setup, or they can be completely portable.
Permanent installations are better for businesses with a physical location or for those who want these decor pieces permanently fixed on the wall. It is especially wise to get a large custom neon sign permanently fixed to your wall.
A business might also need a temporary or interchangeable setup. This will allow you to switch between different signs to accommodate a specific promotion, theme, or holiday.
Portable Setups
Finally, there are also some occasions when you need a fully portable neon sign. Performers in the entertainment industry, for example, rely on a fully portable setup so they can take their neon signs along on tour and set up on any stage.
How To Hang Neon Signs Directly on a Wall
It is fairly easy to fix a neon sign on a wall. Let’s take a look at the best way to secure these stunning signs on your wall for a permanent or interchangeable setup.
Every neon sign comes with a hanging kit which includes accessories like screws, drywall anchors or standoffs. You will also need some equipment like a pencil, hammer, and electric drill to permanently hang the sign on a wall.
It is important to think carefully about the location of your neon sign. The most important consideration is electricity. Your neon sign should be close enough to some type of power outlet.
Neon signs usually have pre-drilled holes in the backing material. Hold your sign up against the wall and use a pencil to mark off each hole location.
Use your electric drill with a suitable drill tip and drill some holes in each marked-off area. You can now use the anchors and use a hammer to tap them into the holes.
Next, you will need to place the screws inside each of these anchors. Use a screwdriver and screw the pieces into the wall. Next, you will need to prop up your Neon sign and use the top portion of the standoffs to tighten the Neon sign in place. Plug the sign in and it will be ready for use.
How to Hang a Neon Sign in a Window
Hanging your neon sign inside a window is a bit more complex because you can’t exactly go drilling holes into the glass. It can also be a bit more difficult to conceal the wiring of your signs inside a window. Here are some practical tips.
To keep the sign in place, you will need to hang it from the window frame. To do this, you will need to secure a chain to the acrylic backing of the neon sign and mount it to the top of the window frame. This will allow you to hang the neon sign in the window without any risk of it loosening and falling.
The cable used for quality neon signs is usually thin and inconspicuous. Despite this, it is best to align the cable along with the chain used to hold up your neon sign. You can also use some clips to run the cable along the edges of the window or around the window frame so the cable won’t be too visible.
How to Secure Neon Signs For Portable Use
For a portable neon sign, it can be good to install some hooks on the top or back of the neon sign backing. This will allow you to hang the neon sign on different walls or against any structure you might have available for your event.
We hope that you found our installation guide practical and that you found a way to secure your signs that suits you! If you need more advice or assistance then you are always welcome to call us here at Neon Party. Our experts are happy to guide you through the process of installation, provide you with more detailed steps, or help you with anything else you may need in order to get your sign up and running.
